Seacast HI-Strength Bucket Kits
|
5 Gallon Bucket Kit
A 5 gallon bucket of Seacast will fill 1000 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 210.60
|
2 Gallon Bucket Kit
A 2 gallon bucket will fill 400 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 126.30
|
|
1 Gallon Bucket Kit
A 1 gallon bucket of Seacast will fill 200 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 82.30
|
1/2 Gallon Bucket Kit
A 1/2 gallon bucket of Seacast will fill 100 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 52.70
|
Seacast Self-leveling Bucket Kits
|
|
Self-leveling 5 Gallon Bucket Kit
For use in floors and decks. A 5 gallon bucket will fill 1000 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 210.60
|
Self-leveling 2 Gallon Bucket Kit
A 2 gallon bucket of Self-leveling blend will fill 400 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 126.30
|
|
Self-leveling 1 Gallon Bucket Kit
A one gallon bucket of self leveling blend will fill 200 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 82.30
|
Self-leveling 1/2 Gallon Bucket Kit
A 1/2 gallon of Self-leveling blend will fill 100 cubic inches. Reinforcement fiber and BPO catalyst is included.
$ 52.70
|
Seacast Extras
|
 PVA Mold Release Paste
2 oz jar will cover 18 square feet
$ 3.90
|
| |
Bonding Primer 3/4 pint -12 ounces
INSTRUCTIONS: Lightly sand the surface to be primed Clean surface using acetone or lacquer thinner Apply Bonging Primer and allow to cure 48 hours Once 12-ounce can covers 1,500 square inches |
|
|
|
Woven roving - 24oz
Use one layer of fiberglass woven roving between two layers of mat to rebuild or repair fiberglass. Order by the square foot. $ 1.46 per square foot.
Enlarge Photo
|
|
|
Fiberglass Mat
Use two layers of 1 1/2 oz fiberglass mat over 1 layer of woven roving to repair or rebuild fiberglass. Order by the square foot $ .78 per square foot.
|
|
Seacast Spacers
|
 |
Seacast Spacers 1.5
Use Seacast spacers when rebuilding the inner skin. The spacers will set the width of your transom and will bond to the new Seacast. (Price Per Custom Spacer)
$ 2.30
Enlarge Photo
|
|
 3" Bristle Roller
Use this bristle roller for rolling tight areas (an extension can be added) |
|
Enlarge Photo
|
|
6" Metal Roller
Use this roller to wet out mat and woven roving and to release air bubbles when laying up new fiberglass
Enlarge Photo
|
|
|
3" Metal Roller
Use to wet out fiberglass mat and roving and release air when applying new fiberglass
Enlarge Photo
|
|
|
Drains |
| |
|
| |
|
Fiberglass and Bristle Rollers |
| |
|
Fiberglass Tape 6
6"(9oz) Fiberglass tape. Order: by the linear foot. Use: re-capping transom. Sandwich between 2 layers of mat. $0.50/LF
Enlarge Photo
|
|
|
Fiberglass Tape 4
4" Fiberglass tape, to be used for re-capping transom. Use between two layers of mat. Order by the foot. $0.40/LF
Enlarge Photo
|
|
|
6" Bristle Roller
Use this roller to wet out mat and roving and to release air bubbles when laying up new fiber glass
Enlarge Photo
|
|
|
Brass Drain Tube |
| |
|
1" Plastic Adj. Drain Tube #520320
Drain tube motorwell, livewell. Adjusts 3/4" to 2-1/2". Fits 1" diameter hole - use 5/8" plug
Enlarge Photo
|
|
|
|
Drain Plug with Snap Handel #520071
Brass snap handle drain plug 1" plug diameter
Enlarge Photo
|
|
|
|
Drain Plug #520030
Plastic Drain plug black - requires 1" hole
Enlarge Photo
|
|
|
3M Saftey Goggles |
| |
|
Paper Dust Mask
.50 each
|
Poly Ester Resin - 1 gal
One gallon (10 LB) jug of Poly Ester Resin. For use with mat tape and roving. |
|
|
